SABS approved · SANS 677 · Made in Cato Ridge, KZN

SABS-Approved Concrete Pipes to SANS 677 (300–1500 mm)

Steam-cured inserted joint and spigot and socket pipes in load classes 50D, 75D and 100D, supplied direct from our factory to contractors, engineers and municipalities across KwaZulu-Natal.

300–1500 mmNominal diameters
50D · 75D · 100DLoad classes
SANS 677SABS mark of approval
Since 1984Manufacturing in Cato Ridge

Precast concrete pipes made to SANS 677

Cobro manufactures SABS-approved precast concrete pipes to SANS 677 at its plant in Cato Ridge, KwaZulu-Natal. Inserted joint pipes are made from 300 mm to 1500 mm nominal diameter, and spigot and socket pipes from 300 mm to 1200 mm, in load classes 50D, 75D and 100D. All pipes are steam-cured in an automated, oil-fired curing system and supplied direct from the factory to civil contractors, consulting engineers and municipalities across KZN and neighbouring provinces.

At a glance

Standard
SANS 677 concrete non-pressure pipes, SABS mark of approval (certificate)
Inserted joint (IJ)
300, 375, 450, 525, 600, 675, 750, 825, 900, 1050, 1200, 1350 and 1500 mm
Spigot and socket (S&S)
300, 375, 450, 525, 600, 750, 900, 1050 and 1200 mm, rubber ring rolling joint
Load classes
50D, 75D and 100D
Standard length
2.5 m (1500 mm IJ: 2.44 m; 750 mm S&S: 2.475 m effective)
Curing
Automated steam curing
Manufacturer
Cobro Concrete (Pty) Ltd, Cato Ridge, KZN

SABS-approved SANS 677 concrete pipes stacked at Cobro's Cato Ridge yard

Inserted joint (IJ) concrete pipes – SANS 677

Every size is available in load classes 50D, 75D and 100D. Where a range is shown, higher classes have thicker walls and are heavier.

Nominal diameter (mm) Internal diameter (mm) Outside diameter (mm) Wall (mm) Length (m) Mass per pipe (kg)
300 295 364 35 2.50 290
375 375 445 38 2.50 415
450 450 532 41 2.50 460–490
525 493–517 607 45–57 2.50 573–710
600 on request on request on request 2.50 603–650
675 660 775 57 2.50 898
750 738 858 60 2.50 985–1,125
825 755 945 95 2.50 1,200–1,625
900 878–890 1,030 70–76 2.50 1,238–1,410
1050 1,025 1,195 75 2.50 1,950
1200 1,135–1,195 1,375 90–120 2.50 2,440–2,450
1350 1,300–1,340 1,540 100–120 2.50 3,400–3,455
1500 1,420–1,455 1,695 120–137 2.44 3,700–4,150

Spigot and socket (S&S) concrete pipes – SANS 677

Rubber ring rolling joint, no lubricant needed. Every size is available in load classes 50D, 75D and 100D.

Nominal diameter (mm) Internal diameter (mm) Barrel outside diameter (mm) Socket outside diameter (mm) Wall (mm) Effective length (m) Mass per pipe (kg)
300 298 362 447 32 2.50 270–323
375 357 433 529 38 2.50 378–398
450 433 521 629 44 2.50 518–530
525 on request on request on request on request 2.50 563–648
600 on request on request on request on request 2.50 673–938
750 728–760 868 1,014 54–70 2.475 1,033–1,355
900 873–903 1,029 1,169 63–78 2.50 1,453–1,713
1050 1,034 1,194 1,352 85 2.50 2,048–2,538
1200 1,125–1,185 1,365 1,675 90–120 2.50 2,630–2,865

Full per-class figures are in the product catalogue (PDF).

Choosing a load class

SANS 677 pipes are classified by D-load. The proof load a pipe withstands, in kN per metre of length, equals its diameter in metres multiplied by its class number, and each pipe takes a further 25% before collapse (its ultimate load).

For example, a 600 mm 50D pipe has a proof load of 0.6 × 50 = 30 kN/m and an ultimate load of 37.5 kN/m; the same pipe in 100D carries 60 kN/m and 75 kN/m. The design engineer chooses the class from the fill height, traffic loading and bedding on the drawings.

Spigot and socket or inserted joint?

Spigot and socket (300–1200 mm): the spigot of one pipe seats in the enlarged socket of the next, sealed with a rubber rolling ring that needs no lubricant. It gives a flexible, watertight joint for stormwater and culvert lines.

Inserted joint (300–1500 mm): a flush-profile joint where one pipe end sits inside the next, keeping a constant outside diameter. It is the only option above 1200 mm.

Delivery across KwaZulu-Natal

Pipes are dispatched from our Cato Ridge plant, about 50 km from Durban and 30 km from Pietermaritzburg, to sites across KZN. Lead times depend on size, class and quantity; we confirm them with your quote.

Concrete pipe prices

Concrete pipe prices depend on diameter, load class, joint type, quantity and delivery distance from Cato Ridge, so Cobro prices each order on request. Send your pipe schedule or BOQ and you’ll receive a priced quote with delivery dates.

Frequently asked questions

Precast concrete non-pressure pipes used for stormwater and culverts are manufactured to SANS 677. Municipal specifications normally require the SABS mark of approval, and Cobro’s pipes carry the SABS mark under SANS 677.
Inserted joint pipes from 300 mm to 1500 mm (300, 375, 450, 525, 600, 675, 750, 825, 900, 1050, 1200, 1350 and 1500 mm), and spigot and socket pipes from 300 mm to 1200 mm, in classes 50D, 75D and 100D. Standard length is 2.5 m.
100D is the pipe’s load class under SANS 677. Its proof load in kN per metre equals its diameter in metres × 100, so a 600 mm 100D pipe carries 60 kN/m and a further 25% (75 kN/m) before collapse. 50D and 75D pipes are proportionally lighter-duty.
Send your bill of quantities or drawing, with diameters, load class, joint type, quantities and delivery location, through the quote form on our contact page, or call 031 784 1444.

Request a quote for concrete pipes

Send your pipe schedule, BOQ or drawing and we’ll come back with pricing and delivery dates from our Cato Ridge plant.